CalgaryBikeBum
Active Member
I have a 2000 Roadking Police which looked identical to yours in the picture. I rode till end of season (changed seat for regular Roadking seat ) just remove the hinge mechanism and air seat components and buy the seat mount screw (captive nut) that goes in back fender. There is a little black hd plug filling hole. If you put a wire tie through that nut you can feed it up through bottom side of fender without removing wheel then slide circlip on and cut off wire tie. Voila' you have the seat mounted. I replaced my saddle bags with some new 2008 Streetglide bags I bought off Ebay. They fit perfectly. Everything basically bolts right on the police bike. I rebuilt the whole thing and repainted over the winter. We can get the run flat tires here but opted to go for the stock HD touring Dunlops as the run flats say they are not rated for 2 up riding? I also put the screaming eagle 95 big bore kit in and it runs fantastic. Just came back from a 1000 mile trip and i got better gas mileage with my carb then my buddies fuel injected ElectraGlide ? Go figure? Although I did rebuild my carb as per Gliders recommendations and it runs/idles and accelerates flawlessly and I only put 2 washer under the needle. HAHAHA Hope this helps. And have fun. I love my Roadking Police