Whitewall Tires

Discussion in 'Touring Models' started by billyg, May 15, 2011.

  1. billyg

    billyg Member

    13
    11
    0
    Looking for advise / comments / experience with..........TIRES!!!

    I have an '07 FLHT in Fire Red Pearl. I still have the stock 9-spoke rims on the bike. At present, I have the Dunlop E3 on the back....the original Dunlop on the front. I do like the overall performance of the E3, but I would like to put a THIN-line whitewall on the bike...front and back.

    Would ya'll offer some suggestions?? I'd like to keep the traction of the Dunlop in mind when I purchase.

    Hope this question makes sense...

    Thanks

    Billy G
     
  2. geezerglide57

    geezerglide57 Member

    22
    0
    0
    Just my opinion...White walls are just something else to keep clean...I will admit that they do look good on some bikes...But I just don't think they are worth the price difference and the extra time to keep them clean.
     
  3. 173ABN

    173ABN Active Member

    271
    26
    0
    I think that Dunlop 402's would work on your FLHT and they come with a wide or thin white wall.
     
  4. dbmg

    dbmg Experienced Member

    5,800
    153
    318
    Here you go. SW- skinny white wall WWW- wide white wall :Dunlop TireD402
     
  5. Old Mike

    Old Mike Member

    83
    0
    0
    I have the thin white walls on my bike and really like the way they look, they do require extra work but I got laced wheels for their looks so to me it's worth the effort cleaning to get the desired results.
     
  6. Jick Scott

    Jick Scott Member

    92
    16
    0
    With a little over 12,000 miles on my original thin white side wall dunlops, I also like the traction and looks of them also and that's what I'll be replacing them with when the time comes. I ride a Harley, if I was worried about the replacement cost of stuff, I'd bought a rice burner. Just my humble opinion, but I've been wrong lots of times.
     
  7. IBA Harley

    IBA Harley Active Member

    139
    0
    0
    I do like the look of thin whitewalls, but can't lie... what a pain to keep clean!!
     
  8. Rock595

    Rock595 New Member

    4
    0
    0
    For looks, depends a lot on your particular bike and color scheme. The wide white walls look great on my '04 RK Classic in glacier white....

    [​IMG]
     
  9. franka

    franka Active Member

    302
    28
    4
    I ride an 07 Road King Classic with spoke wheels and wide white walls front and rear. Yes, it is a job to keep them clean but as you can see in the pic, it's definitely worth it! I spend a lot of time cleaning and polishing my bike and next to riding it's a passion for me. After all, our bikes are representative of who we are, I'm shiny clean!
    Here is how I keep them clean and looking good.
    1. Spray Citrus Clean concentrate on dry wheel, brake dust rolls off.
    2. Scrub with wheel brush
    3. Rinse
    4. Repeat step 1-3
    5. Finish with SOS pad

    Takes a while but results are worth it!
     

    Attached Files:

  10. billyg

    billyg Member

    13
    11
    0
    I replaced the original rear stock Dunlop (402 I think) with a Dunlop E3. I'd heard that following tire snakes was a prevelant problem with the stock tire. I must admit the E3 seems to be a better performing tire. Ive noticed on grooved pavement, the bike has less tendency to 'chine walk'. I'd like to find a WW that would give the performance of the E3. I dont care for the look of the wide whitewalls on the dressers.

    Billy G