HarryB737
Junior Member
Here's a little project I did to help stablize the bike while on the lift.
I welded some "outriggers" in four places on the lift to give it a larger Footprint....Welded angle iron with a 1/2" nut in place with a bolt that can go down & retrack when not needed... Here's some pictures... It helped alot.
I welded some "outriggers" in four places on the lift to give it a larger Footprint....Welded angle iron with a 1/2" nut in place with a bolt that can go down & retrack when not needed... Here's some pictures... It helped alot.