any ideas for fixing stripped breather threads on a 94 fxr. i installed a helicoil iand its working fine for holding the carb but its not letting the breather work. the front lifter block keeps seeping oil...thanks
I dont understand how a helicoil would stop it from breathing unless it was longer than the origional thread as it breathes through the centre of the banjo bolt
I dont understand how a helicoil would stop it from breathing unless it was longer than the origional thread as it breathes through the centre of the banjo bolt
thanks for the info, the bolt is tight & the crush gaskets are in place. im going to take it apart in the morning, I think the helicoil is covering the opening inside the head.