code 34

[redtide]

I think I'll stick to the fifty starts. Since last post ,got around 15 more starts(est.). I'll let ya know in a couple days.

 

[R. Lewis]

I think there is a different pattern for historic codes rather than active codes. If you have the historic code pattern, then your 50 start cycles (of 30 sec or longer each) will get the job done. If you have a current trouble code, you will have to fix the problem first.

TQ

For us ( ok- ME) less experienced -- Do you really have to start the scoot or can your just toggle over for 30 secs. or longer to clear the code?

 

[glider]

Start and run for 30 secs each time will do it after 50 of them.

 

[R. Lewis]

Start and run for 30 secs each time will do it after 50 of them.

So start and run for 30 secs. for 50 times!? Just asking..

 

[glider]

So start and run for 30 secs. for 50 times!? Just asking..

Yep....start it, run it for 30+ seconds, shut it off. Start it run it for 30+ seconds, shut it off, that's 2 times . Or just ride it and it will take care of itself as long as the fault that caused it is fixed. They sometimes set a code for a bad start like a kickback when cranking too. Nothing necessary than the 50 starts to clear that.