Going from this:
To this:
I found these at a local shop for $70. There not perfect but will do just fine and save me about $175
Had to make a few new tools to remove some bolts on the rear cylinder. I ground down a 7/16 and 1/2 in socket to fit a 7/16 end wrench. Will also be needed to set the torque on assembly.
To this:
I found these at a local shop for $70. There not perfect but will do just fine and save me about $175
Had to make a few new tools to remove some bolts on the rear cylinder. I ground down a 7/16 and 1/2 in socket to fit a 7/16 end wrench. Will also be needed to set the torque on assembly.