Throttle cables

Discussion in 'Transmission' started by karthy, Oct 27, 2006.

  1. karthy

    karthy Member

    24
    11
    0
    I'm just slow but how do you install the cables into the grip. I bought a project bike with no cables. How does the idle and throttle go in and wrap around?

    Karthy
     
  2. hillbill

    hillbill Member

    21
    11
    0
    Hi karthy,

    Put throttle in front part of grip and what i call the return side in the front.

    Hillbill
     
  3. johalber

    johalber Member

    32
    16
    0
    The controls are 96 up and snap in. The cables that snap in are for cv carbs which use longer inner cables. The carb I have is a butterfly type which use the shorter inner cable. Cut the inner cable ends and removed from housings. Cut the housings to the lenght I needed. Put inner cables back into housings. Made two barrel cable clamps 1/4 inch to fit carb. linkage. Installed cables into clamps and cut to fit. Works great and is alot cheaper than buying new controls or carb.

    Johalber