Tach for 07 WG

Discussion in 'Dyna Models' started by Spade5, Mar 16, 2008.

  1. Spade5

    Spade5 Active Member

    236
    26
    0
    I am thinking of installing a tach. I am more interested in checking my cruising RPM than running through the gears and not hitting the rev limiter so I don't need a large face or shift light.

    I am also curious about where you connect the wires.
     
  2. glider

    glider Veteran Member

    25,464
    108
    44
    On the 07 bikes, there is a peg in a connector on the back of the speedo in the plug. I believe it is the #3 position. If you have any problems with the tach reading correctly, then wire it to the ecm plug in the #3 position. The rest should be covered in the instructions.

    [​IMG]