Speedo/Tach

Discussion in 'Touring Models' started by fiveoh455, Mar 27, 2009.

  1. fiveoh455

    fiveoh455 Active Member

    116
    28
    1
    I ride a 2001 FLHP Road King Police bike. I ordered a new Speedo/Tach so I can remove the Tach from the handlebar. Anyone done this before? Any tips? Where does the original Tach unplug and what do I do with the wire? Any other info would be great....Thanks.
     
  2. tencrore

    tencrore Member

    10
    11
    0
    I installed the HD speedo/tach on my 08 FLHR. It was simply plug and play. My wiring was a little tight, but was do-able. If your year is anything similar to the 08, the original wiring socket will plug directly into the new speedo/tach input. Should be very simple.

    The only "tip" that I have is that make sure you cover your rear fender with a soft, large towel of some sort so that you can lay your dash/console on it when you are working on the install.

    Hope this helps and good luck.
     
  3. fiveoh455

    fiveoh455 Active Member

    116
    28
    1
    Thanks Tencrore....sounds doable. Appreciate the tip.