Remove engine from frame

Discussion in 'Engine, Fuel and Exhaust' started by dangerdan, Sep 27, 2010.

  1. dangerdan

    dangerdan Junior Member

    922
    26
    0
    Originally I thought I had defective head gasket. That got me thinking on how am I going to remove the engine to fix this.

    So how much does a 80 CC EVO weigh and is there anything I can use to remove the engine from the frame other than my back or friends.
     
  2. ultrat

    ultrat Senior Member Contributor

    1,315
    0
    1
    I changed my h/g w/ engine in frame. & i have removed several evo engines they are not as heavy as shovels. i removed out rt side one person can do it..
     
  3. Jack Klarich

    Jack Klarich Expert Member Contributor

    17,441
    123
    153
    Replace the cylinder studs when you do the build and check the deck for cracking:s
     
  4. TQuentin1

    TQuentin1 Well-Known Member Staff Member Moderator

    4,544
    68
    49
    It is no big deal to remove. One guy can do it easily. Drain it, obviously. And if you strip the top end, it is a piece of cake.

    But you don't NEED to remove it unless you want to or you are gonna split the case.

    TQ
     
  5. dangerdan

    dangerdan Junior Member

    922
    26
    0
    Thanks guys that helps alot
     
  6. ultrat

    ultrat Senior Member Contributor

    1,315
    0
    1
    Your welcome, have fun, don't rush... ride safe..