Primary Drain Plug

Discussion in 'Dyna Models' started by r44s, Jun 18, 2009.

  1. r44s

    r44s Member

    77
    16
    0
    As the stock drain plug is straight and if you're not careful it could be screwed into the primary, is there a replacement with a shoulder and O-ring as used in newer Softails? Thanks
     
  2. glider

    glider Veteran Member

    25,464
    108
    44
    If you have the NPT (tapered) plug in there now,you could retap the hole to take the newer plug with the "O" ring.
     
  3. 00BUCKSHOT

    00BUCKSHOT Junior Member

    446
    26
    0
    if your ride is a 2000
    the prug is not straight and con not be scewed into the primary the plug you have now is a 1/8 pipe plug(tappered thread) just put allitle pipe dope on it before you re-install it you will be fine(unless you over tighten and crack your outer primary cover):D
     
  4. glider

    glider Veteran Member

    25,464
    108
    44