pantherjim
New Member
Went riding on Labor day with no issues. Even stop off for lunch w/o any problems starting. Rode to my siter's house hung out for a few hours and when I was ready to go home, I went to start the bike by turning the key and turn on the run switch and press the start button in which it turned over but did not start completely. Went to try again and saw there were no lights or any display on the speedo or anything. No power to start eventhough the battery was @ 12.8v and all the fuses were good. When you turn the key from off to acc position there is a jump of the speedo needle but no lights and when you turn the key to the on or ignition position there is nothing. I found some wiring diagrams for the bike but don't know where to start trouble shooting. I also check the 30amp circuit breaker fuse. Any help would be greatly appreciated!
Pantherjim
Pantherjim