Low buck Low Rider exhaust mod

Discussion in 'Dyna Models' started by Scoobydann, Apr 5, 2015.

  1. Scoobydann

    Scoobydann New Member

    2
    0
    0
    After riding around on my new low rider I couldn't help but notice everyone's exhaust over the one i was riding. I consider myself cheap and crafty. Being cheap I didn't want to buy a slip on or full exhaust. Being crafty I had to search and use what's available.

    Here is what I used.
    4" grinder
    Welder
    Rush "big Louie" 2.0 baffles
    Drill

    ImageUploadedByTapatalk1428255344.088391.jpg

    Next you have to get the old stuff out. Grind off the weld on the end of the muffler and take out the old stuff.

    ImageUploadedByTapatalk1428255605.055752.jpg

    What it looks like and why you can't hear it.

    ImageUploadedByTapatalk1428255642.706868.jpg

    ImageUploadedByTapatalk1428255659.341436.jpg

    New baffles

    ImageUploadedByTapatalk1428255706.962103.jpg

    I tried it several ways. Complete baffle with origional packing, complete baffle no packing. Modified baffle. The modified baffle sounded best to me.

    Edit. Gotta make another reply to put more pics
     
  2. Scoobydann

    Scoobydann New Member

    2
    0
    0
    ImageUploadedByTapatalk1428255978.668700.jpg
    /\ that's the modified baffle

    Slide it in and bolt it in and you now have a better sounding exhaust that still looks factory. (Best looking in my opinion)

    ImageUploadedByTapatalk1428256059.258617.jpg

    I also cut open the cat and gutted it and welded it back up but no pics of that.

    Hope this helps anyone looking for good sound out of what came on the bike.
     
  3. Jeff Klarich

    Jeff Klarich Well-Known Member Contributor

    3,601
    103
    296
    Good job, any change in how it runs now that you relieved the back pressure?
     
  4. 3delta

    3delta Member

    5
    11
    0
    Thanks for the tips!
     
  5. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    Good deal with the splitter bolt, I have used eye bolts on fish tails before with good results, if you changed the air cleaner also you may need to add more fuel