Is Herko still around?

Discussion in 'Engine, Fuel and Exhaust' started by Wlindsey, Sep 30, 2013.

  1. Wlindsey

    Wlindsey Member

    48
    0
    0
    Last edited by a moderator: Oct 1, 2013
  2. RibEye

    RibEye Junior Member Contributor

    973
    48
    45
    He is out of that business. He does offer a few specialty items. On Ebay, he sells fuel tank crossover disconnects. I don't know what else he sells.

    Enjoy,
    Rich P
     
  3. Bodeen

    Bodeen Well-Known Member Staff Member Moderator Contributor

    4,316
    73
    130
    Yep, he's done.
     
  4. Wlindsey

    Wlindsey Member

    48
    0
    0
    Thanks' for the info guys.
     
  5. dolt

    dolt Senior Member Contributor

    1,815
    83
    206
    The MoCo ended Herko's ability to sell OEM parts when they discontinued discounts to independents back in late 2011; no room for margin. I think John still tunes, sells his fuel cross over quick disconnect and maybe some other odds and ends.
     
    1 person likes this.
  6. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    1 person likes this.
  7. Slo-Ryd

    Slo-Ryd Junior Member Contributor

    487
    28
    18
    Or go with the Screamin Eagle kit like I did. Overall a great kit for quite a bit less than some of the others and you get a hi volume oil pump included. Sorry Jack, i think the Fueling kit is a bit overpriced......at least for my wallet and considering the net result is the same and the moco's kit has great quality parts included :s
    [​IMG]
     
    1 person likes this.
  8. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    :s I agree Al, just throwing it out there as another choice, it is TOO steep for my liking tho it is a Quality product
     
  9. HOLY DIVER

    HOLY DIVER Junior Member

    430
    0
    2
    i went with the screamin eagle kit on my 96ci build,my previous bike i used the herko kit,just used the screamin eagle kit because i was building a whole engine and the SE kit was more cost effective.keep in mind if you have your heart set on conversion tensioner upgrade you can go buy all the parts from HD and order up some andrews conversion cams and then you will have the same as what herko would have sent you:D
     
  10. RibEye

    RibEye Junior Member Contributor

    973
    48
    45
    If you get the 2006 Dyna parts manual, you will have access to all the parts and part numbers you need for the hydraulic conversion, except the Andrews cams.

    Enjoy,
    Rich P