Installing , heavy breather on 2003 road king classic

Discussion in 'Touring Models' started by Axlegreaze, Aug 4, 2012.

  1. Axlegreaze

    Axlegreaze Member

    14
    0
    0
    I have a desire to install a Screamin Eagle Heavy Breather on a 2003 Road King Classic. Problem is I am not sure what the intake bore on my bike is, I think it may be 42Mil. SE dosen't make one for my TC88, Upgrded to Big Bore, TC95, EFI, Stage One, engine. Is it possible to do? Is there a modification that can be made relatively easy, and what is the bore on the SE Heavy Breather? I don't know if there is an adaptor out there that will make this possible or not, but if there is and I am able to get it installed properly do I have to have my engine remapped? Thanks in advance to all who respond with information. Ride Hard, Ride Safe, Ride Well !!
     
  2. TUCCI

    TUCCI Member

    76
    0
    1
    I bet JPCycles has one that will fit your bike.
     
  3. Bodeen

    Bodeen Well-Known Member Staff Member Moderator Contributor

    4,310
    73
    130
    Wimmer High Performance Intakes Main
     
  4. TUCCI

    TUCCI Member

    76
    0
    1
    Yeah Wimmer is in there also, I like the way their design addresses the breather drip issue but you never know until you've had one running awhile.
     
  5. Fritz

    Fritz Member

    84
    16
    0
    No adapter needed,just buy the pre2009 breather. If you got the stage 1 download no tuning needed either.