How to tell if ECM is set stock

Discussion in 'Dyna Models' started by Twinkie07, Apr 24, 2015.

  1. Twinkie07

    Twinkie07 Member

    7
    0
    0
    I bought this 2007 Street Bob and it has a set of V&H Big Radius pipes and open air cleaner.How can I tell if it has a download in it on what download it has?
    I am putting the V&H Fuelpak on and need to find this info out.
    thanks
     
  2. Dan.1977P

    Dan.1977P Active Member

    258
    38
    3
    You can check with a dealer and see if they can find the service records for that bike. If it was done at a dealer, they will record it and I've heard you can lookup the records at any dealership
     
  3. CRCKR

    CRCKR Active Member Contributor

    128
    38
    11
    Good question. I've been told that you can only find out what the service history is at the dealership if it is where the service took place. I scratched my head and kind of didn't believe it... Seems like it would be a realistically low cost implementation and a great service to the community.
     
  4. Harttoo

    Harttoo Senior Member

    1,337
    68
    98
    Crank it up,if it stops at 5200 RPM it's stock.If it goes to 6200 it has download.
     
  5. Jack Klarich

    Jack Klarich Guest

    The dealer can verify this with their scan tool
     
  6. STEVE07

    STEVE07 Well-Known Member Staff Member Super Moderators

    4,057
    68
    62
    HD service records are available to all dealers in North America. I found that out when I broke down in New Orleans. They inputted my vin# and the full repair history came up on the screen.
     
  7. Twinkie07

    Twinkie07 Member

    7
    0
    0
    Called the dealer that put the pipes on.They had records of the pipes but not what download they used.:(
    NOW WHAT :newsmile040:

    But they charge $85 per hr to check it plus it is a 50 mile trip there
     
    Last edited by a moderator: Apr 25, 2015
  8. Bodeen

    Bodeen Well-Known Member Staff Member Moderator Contributor

    4,376
    73
    150
    Cheap too! Sure way to find out...:D
     
  9. Twinkie07

    Twinkie07 Member

    7
    0
    0

    this would work but a street bob has no tach :(
     
  10. Dan.1977P

    Dan.1977P Active Member

    258
    38
    3
    Doesn't the fuel pak have a usb cable and software for your computer that will show you your current sensors?