Historical code

Discussion in 'Softail Models' started by FLST, Apr 16, 2013.

  1. FLST

    FLST Active Member

    248
    28
    4
    05 Softail displays historical code P0122. Electronics manual only shows how to test TPS using a breakout box. Is there a way to test it without the box? Since this is an historical code and the bike seems to run fine is testing really necessary?
     
  2. HDDon

    HDDon Experienced Member Contributor Retired Moderators

    5,456
    133
    196
  3. tourbox

    tourbox Senior Member

    1,311
    68
    54
    HDDON's post of link will tell you how to clear the code manually. It's for '04-'07(and up I believe). You can clear the Hist. code,ride a mile or 2, or more if the urge hits you. Then re-check to see if the code returns.
    tourbox
     
  4. FLST

    FLST Active Member

    248
    28
    4
    I know how to retrieve codes and how to clear them. I cleared the code but haven't ridden yet because it's a bit chilly. Thank you for the input. I'll give her fifty rides and see what happens. That'll be fun.
     
  5. Dr. Dolittle

    Dr. Dolittle Experienced Member Staff Member Moderator Contributor

    6,399
    108
    24
    I think you're mixing up procedures.

    If you manually cleared the code, it's gone unless the malfunction occurs again and resets the code.

    The fifty start/shut down cycles clears the historical code if you do nothing to it manually.
     
  6. FLST

    FLST Active Member

    248
    28
    4
    Thank you for clarifying that for me Dr. Every time I log on here I learn a little bit more. If the code recurs I may be back for more info. Thanks again to all.