Gen 3 tfi

Discussion in 'Engine, Fuel and Exhaust' started by Barnicle, Jun 18, 2010.

  1. Barnicle

    Barnicle Member

    25
    11
    0
    Anyone out there have an optimal setting for all 6 modes on the gen 3 TFI?
    This would be for a 08 FXD with V/H big sucker and C/S Slip ons.




    oops, that is a Arlen Ness big sucker
     
    Last edited by a moderator: Jun 19, 2010
  2. sharpscuba

    sharpscuba Banned

    945
    0
    1
    Are you referring to which lights should be on at each stage?
     
  3. Barnicle

    Barnicle Member

    25
    11
    0
    Yes, on the generation 3 TFI there are 6 modes. To be more specific, when setting the level of each mode to what level 1 through 8 is set? This is programing modes and does not reflect which lights are on when operating.
    I suppose I am looking for below.

    Set How? (example)
    Mode
    1 1 through 8 = 4
    2
    3
    4
    5
    6
     
  4. sharpscuba

    sharpscuba Banned

    945
    0
    1
    I believe what you are looking for is the following:
    mode 1= lights 3&4 green
    mode 2= light 3 yellow
    mode 3= light 3 red
    mode 4=light 2 flashing green and 8 blue
    mode 5= light 4 yellow and 8 blue
    mode 6= lights 4&5 red and 8 blue
    This is the setup I use for my O7 hope that it helps.




    Also keep in mind that this is for a stage 1 setup. Like you I have the Big sucker and I went with the Rush 2" slipons. This setup has worked well for me. Enjoy!
     
    Last edited by a moderator: Jun 19, 2010
  5. Barnicle

    Barnicle Member

    25
    11
    0
    Thanks, I am close to the same..
     
  6. Grillfish

    Grillfish Junior Member

    652
    28
    2
    Curious.... I have the TFI with the pots to turn. What's the main difference with now 6 modes on the Gen 3 to set vs. the 4 pots on the TFI I have?

    Thanks. Ride safe and have fun!