We can only go by what the OP posted and that question has been answered. If the OP meant something else, he needs to come back and ask the right question. What wasn't answered was the question about pre '14 heads.
They were not the same. '99-'05 were straight wound springs that limited lift to .525". '05 introduced the 7mm valves, beehive springs that would accommodate lifts to .575". '06 heads were a new casting the breathed better than any previous heads and springs that would accommodate up to .600" lift (there is some debate about whether that is .590" or .600"). '07 and up are all the same and will interchange. Actually, all will interchange but installing a set of '05 heads on a later model 96" or 103" would be going backwards.