nascar7613
Active Member
2007 Softail Duece. Bike would start, stall, start, stall. Looked inside fuel tank and found that the fuel pressure regulator plastic housing had a broken tab. Replaced the housing but now the pressure regulator keeps pushing out of the housing slightly and the bike doesn't want to take gas and eventually stalls. I bent the tabs on the cover plate where the housing goes in as much as I could to try to hold the regulator in tighter, but it still pops out enough to cause a problem. Thanks in advance for any advise.
Also, the code PO107 was set. It took several attempts to clear the code through the speedo. After clearing the code, the bike would run the same, and the code will come back.:wall
Also, the code PO107 was set. It took several attempts to clear the code through the speedo. After clearing the code, the bike would run the same, and the code will come back.:wall
Last edited by a moderator: