First Post

Discussion in 'Touring Models' started by rockfish, Aug 3, 2016.

  1. rockfish

    rockfish New Member

    2
    1
    0
    Hello everyone! I've been following this forum for a while, but this is my first post. I have picked up quite a lot of useful information. I've owned Harley's for many years and recently purchased a 2004 RK Custom from a friend in another city. I flew there to check out the bike and the next day hopped on it and drove it 650 miles home. It has a K & N air filter and Rhinehart slipons. I'm considering installing a Dobeck Gen 3. This seems to be the controller of choice. Any comments?
     
  2. jamesearl

    jamesearl Senior Member Contributor

    1,293
    83
    153
    Greetings from Hoffman Estates,Illinois.
     
  3. Jack Klarich

    Jack Klarich Guest

  4. rusntx

    rusntx Active Member

    395
    38
    52
    Welcome to the forum from north TX
     
  5. tourbox

    tourbox Senior Member

    1,456
    68
    86
    Welcome from So. Texas.
    tourbox
     
  6. Harttoo

    Harttoo Senior Member

    1,407
    83
    104
    Welcome from Wisconsin.
     
  7. geezer

    geezer Senior Member Contributor

    1,663
    68
    57
    Welcome aboard from Canada. I put a Gen 3 on my wife's bike and it works great. More power, cooler oil temps and even an increase in mileage. :)
     
  8. coopernicus

    coopernicus Junior Member Contributor

    755
    48
    81
    Welcome from southeast Illinois!
     
  9. Jeff Klarich

    Jeff Klarich Well-Known Member Contributor

    3,877
    103
    334
    Welcome to HDT from the Rocky Mountains.
    The Dobeck gen 3 works well with the better airflow and exhaust change already done to your new scoot.
    Adding more fuel will also help cool down a hot engine.
     
  10. rockfish

    rockfish New Member

    2
    1
    0
    Thanks to all for the greetings and your comments on the Dobeck Gen 3. I spoke to them and they were very friendly and helpful. I have ordered one and it's on the way. I'll post back after it's installed with my report.