Dyno At Biketoberfest

Discussion in 'Sportster Models' started by Daveg09, Oct 18, 2015.

  1. Daveg09

    Daveg09 Member

    5
    0
    0
    Just thought I'd let ya know how the '09 1200C did on the dyno. Bike is stock except for the stock exhaust being drilled out with an 1 1/4" hole saw. Got 71+ H.P. and 73+ Lbs. of torque. Fuel Air ratios were good. Guess you can't ask for more than that from an almost stock bike. Had a blast tons of stuff to do and goodies to look at. Later guys.
     
  2. Jeff Klarich

    Jeff Klarich Well-Known Member Contributor

    3,596
    103
    296
    Respectable numbers.
     
  3. HDDon

    HDDon Experienced Member Contributor Retired Moderators

    5,456
    133
    196
    Those are just a few points higher than stock numbers. JMO but you could see better numbers if you opened the air flow with a free flowing AC and some type of fueler. Your bike is probably running a little lean due to the factory settings and opening the exhaust.