Btown Bagger
Member
I'm hoping Glider responds to this, I know he like the Doebeck TFI. My only concern is disconnecting the O2 sensors with the Doebeck and not with the Cobra. All thoughts welcome.
Without the resistors that they furnish, it would set a code but with them it keeps a code from setting. I had one bad resistor which they replaced NC. It set a code for the 02 sensor but you can clear it easy enough.
There is a connection aprox 8" from the O2 sensors. I assume you unplug the sensors and plug the TFI connector in it's place. Then did you remove your O2's or just hide the wires somewhere?
I left the 02's in place and secured all the wires so they wouldn't get damaged.
You are correct about the resister locations in the plugs.
Order being placedd today. Thanks for all the help Glider. This baby's goint to purr like a kitten if I'm right.