Hooker pipes, would adjusting settings from tork to horespower make the sound deeper in tone or just louder? I have tried to adjust the baffles myself however I couldn't get it to budge. I prefer more low end tork rather than high end horsepower but would find a way to adjust the setting if it would change the tone. When I tried to adjust the settings myself I removed the the ring completely at rear and even used lubricant to try and free it but it still wouldn't budge. Hookers website says to back off the ring a bit a move the baffle 1/8" backwards to make adjustments. I've tried wiggling it loose with no luck. Anyone out there experience the same problem and what trick did you use to adjust setting?
Got a SERT to get rid of decel pop what should I ask when I get my bike dyno'd and how long should it take. I was told by one shop about an hour. Isn't that a bit low for a proper tune? Will tuning it up make it sound better, Deeper, with corrected afr tables and better running bike. My big bore kit with cams sound nice at idle, but cruising sounds don't seem to be deep enough to me. Is that normal?
Just got the big bore kit installed just waiting for the next 1000 miles to go by. Spending way to much money to make the beast sound better...but hey thats harley for you.
Got a SERT to get rid of decel pop what should I ask when I get my bike dyno'd and how long should it take. I was told by one shop about an hour. Isn't that a bit low for a proper tune? Will tuning it up make it sound better, Deeper, with corrected afr tables and better running bike. My big bore kit with cams sound nice at idle, but cruising sounds don't seem to be deep enough to me. Is that normal?
Just got the big bore kit installed just waiting for the next 1000 miles to go by. Spending way to much money to make the beast sound better...but hey thats harley for you.
Last edited: