Delmar
Active Member
The battle scars earned in the line of duty used to look cool but are now getting old. My next project is to remove the dent in the front fender. I assume it got whacked by the driving light bar when the officer ran into something.
The dent is centered over the mounting bracket. I can’t see or feel inside without removing the fender, does the bracket go all the way under the fender to the other side? If the bracket is not underneath the dent I’m going to attempt banging it out from behind.
Is there a disconnect plug for the fender light wire, or do I have to cut the wire and resolder?
I’m open to all suggestions for a cheap fix. It appears too deep to just bondo over. I prefer something that makes it look 50% better for $100, rather than making it look absolutely perfect for $1000.
The dent is centered over the mounting bracket. I can’t see or feel inside without removing the fender, does the bracket go all the way under the fender to the other side? If the bracket is not underneath the dent I’m going to attempt banging it out from behind.
Is there a disconnect plug for the fender light wire, or do I have to cut the wire and resolder?
I’m open to all suggestions for a cheap fix. It appears too deep to just bondo over. I prefer something that makes it look 50% better for $100, rather than making it look absolutely perfect for $1000.