Custom Evo Problems

[Rooster209]

im building a custom '91 Softail with a 92" S&S EVO with billet rocker boxes and roller rockers. I've got it almost installed until I realized my pushrods didn't have any color markings. I have two that are shorter and I'm unclear which order they're installed. Is there any way to know by their lengths?

 

[Breeze3at]

Right out of my 1992 Dyna Service manual: Shortest (blue) = Rear Ex., 2nd shortest (yellow) = Front Int., 2nd longest (purple) = Rear Ex., longest (green) = Front Ex.

 

[tourbox]

With S&S push rods, or just about any after market, the 2 short ones are intake, 2 long ones are exhaust.
Only factory are color coded due to 4 different length. S&S push rods should have a 32 TPI, they would adjust at 4 turns(24 flats) after zero lash. You can go to S&S web for exact procedure if need be. I take it the motor was apart?
tourbox

 

[Breeze3at]

Tourbox's response is correct. I made a typo and did not catch it. Intakes are shortest.