cruise control

Discussion in 'Electrical' started by nascar7613, Apr 23, 2008.

  1. nascar7613

    nascar7613 Active Member

    217
    28
    1
    I have a 04 SE electra. I was riding last night with the cruise on. All of the sudden, the bike started to decel. The cruise light stayed green, but the cruise would not engage. I noticed this morning when I started the bike that the cruise light was green right away without even moving the bike. The cruise still does not work. Any suggestions or advise would be appreciated.
     
  2. nascar7613

    nascar7613 Active Member

    217
    28
    1
    I tried to pull codes but get nothing at all
     
  3. glider

    glider Veteran Member

    25,464
    108
    43
    Was your "run/stop " switch on?

    Is the brake light lit when it shouldn't be?
     
  4. nascar7613

    nascar7613 Active Member

    217
    28
    1
    The run stop switch was probably on when I tried to pull the codes. Should it be off? The brake light works properly.
     
  5. glider

    glider Veteran Member

    25,464
    108
    43
  6. nascar7613

    nascar7613 Active Member

    217
    28
    1
    I went through that procedure and do not even get the 111 memory clear code.
     
  7. glider

    glider Veteran Member

    25,464
    108
    43
    Did you follow the instructions to the "T". It should work.

    Engine OFF, cruise switch OFF etc?
     
  8. nascar7613

    nascar7613 Active Member

    217
    28
    1
    Sorry about that. Ican get the codes sometimes, but not everytime. Iwas fooling with it a couple days ago and I was getting code 122 for the first four then the 111for the last four. Then it quit flashing codes. Then when I started the bike it would flash the code once and it did that the next few times I started the bike. It's weird as hell.
     
  9. Fisher

    Fisher Account Removed

    341
    0
    1
    The cable does break occasionally.