compensator 99 FDX

Discussion in 'Engine, Fuel and Exhaust' started by raytriker, Apr 20, 2013.

  1. raytriker

    raytriker New Member

    1
    0
    0
    The shims (washers) on the shaft extension. Just after the nut or next to the
    rotor? Book shows one way Harley says could be two.
     
  2. BUBBIE

    BUBBIE Well-Known Member

    4,974
    83
    124
    Look at the Chain...See if it is straight to a straight edge... That is the reason for ANY shims... Double chain MUST run straight. If the chain is straight it is correct.

    signed....BUBBIE
     
  3. tourbox

    tourbox Senior Member

    1,645
    83
    118
    Welcome to the forum. Parts book shows it as next to rotor. Only 1 washer. If you don't have a parts manual you can go to shopronniesharleydavidson.com.
    There look for OEM parts finder tab.
    tourbox

    If you have more than 1 washer then Bubbie is correct.They are used to align the motor sprocket to the clutch sprocket.
    tourbox
     
    Last edited by a moderator: Apr 21, 2013
  4. Jack Klarich

    Jack Klarich Guest

    [​IMG]
     

    Attached Files: