ABRANGER123
Member
I have a 1996 1200 sportster, that I am putting back together since the person before me had taken it apart . The issue is that I am not getting no spark through the coil. I have a new coil, dual fire coil,I have the pink wire running to the right side and the black and white going to the left from the ignition module. I have 12V on both sides. I also have the same wires from the ignition timing going to the same spot on the coil. For the ground I'm guessing that it grounds being mounted to the frame or the spark plugs ground it out. I have used a spark tester tool no luck. Any advice would help!