I have a '96 Road King. I bought it in '03 with 7,000 miles on it. I put on Screamin eagle heads,woods w6 cam Rhinehart true duals. Mikuni HSR42 carb a screamin eagle ign. module.Now I have 20,000 on it and I had some rattling coming out of the primary. So decided to put a new clutch in. I went to my local bike shop that I trust. I have known the guys for years. They recommended putting the Alto Carbonite clutches in. Well I did and the old spring plate was loose and the original steel plates were burnt. I put in the new discs and now if I decide to pop the clutch it slips and sound like a loose belt slipping. I took it over to my buddy who is a Harley mech. and we took everything apart and everything was put in by me correctly. He set the adjustment on the clutch and it still does it. We even put a heavier spring from brute in and it doesnt help. I am running Amsoil 10/40w in my primary which a tech guy at Alto says isn't the problem. They are sending me a new set which makes me wonder. The slipping only occurs upon start up out of first. When shifting through the gears there is no slipping and also if I down shift no slipping. ANY IDEAS????