campatiblity of led tail lamp

Discussion in 'Dyna Models' started by odie13, Jan 25, 2012.

  1. odie13

    odie13 Member

    45
    0
    0
    Hi all I was thinking about installing HD LED tail lamp 68085-08
    With HD auxiliary brake light/ running light/turn signal/
    conversion kit 69462-06c
    Are these two kits compatible?
    Is anyone out there running this combination?
    If so how do you like it?
    I have a 09 lowrider
    Any info would be appreciated Thanks!
     
  2. Hoople

    Hoople Account Removed

    7,198
    0
    34
    I don't have that exact combo but on my 2009 FXDL I have something similar to that. I have the HD turn signal conversion kit along with a BAL 2 LED tailight. (brightasslights.com). This setup was plug and play and it's killer. Most likely the combo you want to use will be the same. (Plug & Play with no problems)

    I left my turn signals amber and did not use the red lens covers. Never had a problem with the law.
     
  3. Breeze3at

    Breeze3at Well-Known Member

    4,645
    83
    124
    They should work together with no problem. I just looked them up on the HD website, and there is no disclamer stating they are not compatable with stock electrical system requirements. HD is usually pretty good about stating what other stuff you need to buy. I have the run/stop/turn module and like it. Some have reported that there is not much difference in brightness between run and stop, but mine is quite brighter. The led taillight might be bright enough that you wouldn't need the run/stop/turn. Maybe try just the taillight first?
     
  4. odie13

    odie13 Member

    45
    0
    0
    Hi Just checked out the Brightasslights site very impressive.
    can't swing the bal 2 But what do you think of the BAL-3RT?
    How are they adjusted do you get a remote?
    Also where is the best place to buy?
    I to was going to let the amber lenses on the turn signals.
    Thanks a heap guys for your input
     
  5. Hoople

    Hoople Account Removed

    7,198
    0
    34
    Originally I purchased a BAL-1. I liked it so much, I had to sell it in order to see what the BAL-2 was all about. Comparing both I would say the BAL-1 packs more than enough performance for the price. Since the manufacture says the BAL-3 has the same performance as the BAL-1 (but only in a "low down" style), I can tell you that you will like the BAL-3 as far as performance.

    The patterns are changed with a powerful magnet that comes with the light. There is a magnetic reed switch behind the lens that is activated with the magnet. It walks through the patterns and you remove the magnet when you have the pattern you like. The selected pattern will be retained even if the bikes main battery is removed. Also has a 5 year warranty. I am very happy with both purchases.

    Can't really tell you where to buy one. I had a local dealer that was nearby me. Their website lists the dealers. :)
     
  6. odie13

    odie13 Member

    45
    0
    0
    Hi I am going with the bal-1 , Thanks to all
     
  7. shortster58

    shortster58 Member

    39
    16
    0
    i went with the custom dynamics led tail light and signal light also the c.d run , brake and tail light unit ...works great and nice and bright
     
  8. odie13

    odie13 Member

    45
    0
    0
    Hi I ended up finding a BAL-3RT on ebay for $199 plus $9 shipping from
    Big Moose HD. Thats $50 less than the web site and other dealers
    I just hope I like the laid back design.
    The custom dynmics look like really nice units also.
    So many choices, So little cash