Brake Rotors

Discussion in 'Dyna Models' started by porkchop39, Mar 10, 2009.

  1. porkchop39

    porkchop39 New Member

    2
    11
    0
    Who besides $$$performance machine$$$$ makes brake rotors for a 2009 dyna street bob? Can't seem to find very many out there.
     
  2. jmpancoast

    jmpancoast Active Member

    232
    28
    1
    I ran into this issue when I replaced the front cast wheel on my 06 Super Glide. I replaced it with a wheel which used the hub from a Street Bob. After doing some research, I learned a 44156-00 would work. I found one on eBay and it fit fine. I used it few several thousand miles with no issues.

    The 44156-00 is the front rotor used on MANY 2000 and later Harley models. This being the case, you should be able to use any of the aftermarket rotor available for the same years.
     
  3. DadzLowrider

    DadzLowrider Active Member

    137
    26
    0
    I believe these guy's SMT make floating rotors and seem to be very reasonably priced. I think the guy there is named Jamie and his number is 623-931-9965