Auxiliary Brake/Run/Turn signal Conversion kit

Discussion in 'Electrical' started by odie13, Mar 13, 2012.

  1. odie13

    odie13 Member

    45
    0
    0
    Hi
    I am trying to install a Auxiliary Brake/Run/Turn signal Conversion Kit
    number 69462-06C
    If I read the instructions right with this kit. They tell you to have the fob present, turn the key switch to ignition, and then remove the main fuse.
    (ok that's if you have a siren) Then remove the seat and install the module.
    Why can't I just remove the seat and install the module.
    Would some one please explain this. I don't know much about electrical
    systems.
    Thanks
     
  2. Iceman24

    Iceman24 Well-Known Member

    3,224
    48
    13
    Guess you never experienced a hot-short on bike before...not fun. Unless you want to take a chance @ popping fuses & melting wiring - best to remove your main fuse. Should always be step-1 when working w/electrical on vehicles...
     
  3. odie13

    odie13 Member

    45
    0
    0
    Iceman, Your right I never experienced any of those things.
    I will differently pull the main fuse.
    Thank you very much for your reply