assembly instructions: reduced effort clutch kit

Discussion in 'Transmission' started by Tuukka, Jun 11, 2008.

  1. Tuukka

    Tuukka Member

    36
    16
    0
    Hi, I bought reduced effort kit to my 2002 Dyna Super Glide. Kit is HD product. I did not get any instructions with hardware. I am new with HD. Is it difficult to assemble? I could not find any videos or other instructions what I need and should do. Thanks, Tuukka
     
  2. glider

    glider Veteran Member

    25,464
    108
    43
    It's not a difficult thing to do. Here's the write up by joy and the one Hobbit posted will fill you in on the other hints.

    Easy Clutch Installation by Joy - Harley Davidson Community

    Bike on side stand so you don't loose trans fluid and you should be good to go.
    Your unit will be similar to the one that joy posted in appearance and workings.
     
  3. Joyflyin

    Joyflyin Experienced Member Staff Member Moderator

    5,269
    118
    71
    Sorry, I'm a slacker! Hint, have a manual handy, and if I were doing this again, I would plan on at least loosening the pipes, (I didn't plan on it and had to, that was my small panic attack :D). You might be okay, I have V&H pipes. Good luck, let us know how it works out for you.