Anyonre have issues with the Brass fitting to Air shocks

Discussion in 'Touring Models' started by BuffaloBill, Dec 9, 2009.

  1. BuffaloBill

    BuffaloBill Active Member

    177
    26
    0
    Hello Gang

    Last hight I was attemting to remove the Rear Air Shocks on the Ultra and stripped the Brass fitting (11)mm wrench I used a Bleeder wrench but the fitting was frozen I will call the Dealers today to see if I can cut the air line before the Red plastic piece and slip a new fitting on

    Any advice would be helpfull
    BuffaloBILL
     
  2. jvalny

    jvalny Member

    13
    0
    0
    Well you don't have to cut the air line. The red plastic piece is a compression lock. Just pull on the plastic and then take out the air line. Can't help you on the brass fitting.