Anyone put lowers w/ dyna standard shield

Discussion in 'Dyna Models' started by CIP57, Feb 11, 2009.

  1. CIP57

    CIP57 Member

    12
    11
    0
    Just purchased a Dyna Quick release 58346-06 for my FXDC and would like to know if anyone has put lowers to help stabilize the up draft with this shield. If you have pic's and part #'s that would be helpful.

    Thanks,
    Steve
     
  2. eleft36

    eleft36 Junior Member

    441
    26
    1
    I put lowers and a front wheel air baffle (part#5820-79TC) on my FXSTC.

    Big improvement, tested up to 75.
    Sorry upload failed.

    Al
     
  3. CIP57

    CIP57 Member

    12
    11
    0
    One other point, whats up with the quick release setup that puts the shield about one inch in front of the headlight. It seems they have one attachment setup for all bikes. The shield should be at least flush or in from the headlight. Really poor hardware design.
     
  4. we_brown

    we_brown Member

    13
    11
    0
    I put a quick release on my 2008 FXDF with forwards. When I hit about 70mph I thought that my head was going to shake off. I added the Rifle lowers and the problem went away. I have ridden up to about 85mph with no problems.
     
  5. litesoutbonz

    litesoutbonz Member

    7
    11
    0
    got any pics of your windshield set up we brown? I too have an 08 fxdf and have no windshield...yet
     
  6. eleft36

    eleft36 Junior Member

    441
    26
    1

    Attached Files:

  7. eleft36

    eleft36 Junior Member

    441
    26
    1
    Found the lower photo, on my softail custom , they will fit Dyna. Stopped the wind from following my legs up to my chest and face. Along with the front wheel baffle.

    Al
     

    Attached Files: