Discussion in 'Dyna Models' started by cyborg, Aug 5, 2014.
Looking for someone with Aluminum Laced wheels.
I got some questions before i buy.
They are tough to keep clean
As Jack said, a bear to keep shiny, but if you go that way get some Barkeeper's Friend, awesome for aluminum.
Thank you Gent`s, that`s what i want to know.
Harley Davidson Forums
Read more here:s
They most certainly are! That is-hard to keep clean and HARDER to clean.
I have found the best way to do it is to lift the bike up on my Jack and use a large soft sponge to get twixt the spokes, and warm water with lots of sudsy car wash in it.Get all the road and brake dust off and blow the wheel good and dry with my AirForce Blaster.Then run around every individual spoke up and down with a piece of polish impregnated cloth. Not forgetting to do the insides of the Hubs and of course the Rim.
Then clean off the polish residue with more pieces of soft cloth.The whole process takes me about 3 hours,but if you want the wheels to look good, you gotta put the time in----.
I have heard tales of Harley wire wheels rusting before their time as water gets inside the rim through the spoke holes.That's one of the reasons I use a warm air blower and rotate the wheels in an attempt to drain and get rid of as much water as possible.
I absolutely hate cleaning my bike... 95% of the time it's filthy. I'd rather be riding it than cleaning it. But as it goes, a happy bike is usually a clean bike.
I have not cleaned either of my bikes all year. But I plan on it this weekend. The 883 wheels are in need of TLC with some Barkeepers Friend. The Ultra's isn't too bad. Still lots of work.
Separate names with a comma.