W.Bacon
Member
In the couple of months since I joined this forum I have made regular use of the self help pages and forum searches.I feel the need to thank everyone who participates in putting all this information together. I'm really glad I found this place.
I picked up this '89 fxr as a fixer project for the winter. Among other things, I noticed that the head gaskets were leaking. When I removed the heads, I found that the bolts on the carburetor side of the cylinders were loose, both cylinders, and the left side bolts were tight. So my question, is there anything specific to these early evo's that would cause this?
I'm thinking that if I just carry on and do the repairs properly, all will be well, but if there is some other issue that I should address?
Thanks, Bill.
I picked up this '89 fxr as a fixer project for the winter. Among other things, I noticed that the head gaskets were leaking. When I removed the heads, I found that the bolts on the carburetor side of the cylinders were loose, both cylinders, and the left side bolts were tight. So my question, is there anything specific to these early evo's that would cause this?
I'm thinking that if I just carry on and do the repairs properly, all will be well, but if there is some other issue that I should address?
Thanks, Bill.