2014 fatboy front directionals

[fatboywayno]

just change bars to 14in and need to figure out the best way to take directionals out of switch housing they seem to be hard wired. new bars game prewired without lights

 

[Bodeen]

Remove the wires from the connector on the opposite end of the switch. Some shrink wrap and a soldered on piece of wire required for your length should do it. You can release the wire out of the connector with a paper clip or small screwdriver. Patience is paramount.

 

[Jack Klarich]

Here is an exploded view does it help?

 

[fatboywayno]

thanks