2009 FLHX 103 stage 4

Discussion in 'Dyno Runs' started by Brutal FXDX, Nov 4, 2010.

  1. Brutal FXDX

    Brutal FXDX Active Member

    155
    28
    2
    Here is the dyno sheet for a 2009 FLHX with a S.E. stage 4 kit i built and tuned. Had Vance&Hines Power duals w/ rinehart slipons and S.E. heavy breather.

    [​IMG]
     
  2. ultrat

    ultrat Senior Member Contributor

    1,315
    0
    1
    looking good......
     
  3. Hoople

    Hoople Account Removed

    7,198
    0
    34
    Nice but why did they plotted your torque & H.P.-VS- MPH and not RPM. I would want to know what my torque and H.P. was vs RPM not MPH.

    In what gear was the pull performed.
     
  4. Brutal FXDX

    Brutal FXDX Active Member

    155
    28
    2
    That was my fault when i pulled up the run, forgot to change speed to eng speed.Its a 4th gear roll on

    This is the bike that lost 10hp and tq when V&H pro pipe was installed and retuned. Put the power duals back on and numbers were about the same as above. Customer wants to try a RB racing LSR 2-1 next.

    sorry, looking at the speed of that run maybe 5th gear. cant remember
     
    Last edited by a moderator: Nov 4, 2010