2005 flrsi

Discussion in 'Electrical' started by 2005flrsi, Jun 28, 2010.

  1. 2005flrsi

    2005flrsi New Member

    1
    0
    0
    Just finished riding and shut off the ignition to my bike and noticed that my radio and dash lights were both still on... Im figuring a bad switch (goes without saying)... I have disconnected the neg. cable and refastened it, light stays off until I turn ign. on or assec, either way... Thoughts!!! Thanks

    _________________________________________________________________


    Not sure if disconnecting the battery fixed it or if WD-40 on the connecters was the fix... Working now, but would still like to know if anyone else had this problem and what they did to fix it... Thanks...
     
    Last edited by a moderator: Jun 28, 2010
  2. Hoople

    Hoople Account Removed

    7,198
    0
    34
    Not telling you what not to use (WD40) on electrical connectors but I would use something more suitable like DoxIT 5%.

    I have seen WD40 attack the plastic housings used on electrical connectors.

    DeoxIT® D-Series