1997 Electraglide motor mounts

Discussion in 'Touring Models' started by DCLARKE, Jul 25, 2012.

  1. DCLARKE

    DCLARKE Member

    27
    0
    0
    I am working with a friend on a project. Replacing front motor mount on 1997 Electraglide. Does anyone know if the torque settings would be the same as my 2008 Roadking? I have the service manual for the Roadking but not the Electraglide. I have looked in the self help section but have not found any specific settings.
     
  2. Breeze3at

    Breeze3at Well-Known Member

    4,645
    83
    124
    My '92 service manual says front engine mounting bolts 33-38 ft. lbs.
     
  3. steve57

    steve57 Member

    6
    0
    0
    I have a 97 Electra Glide Classic. In my service manual it says,

    "Tighten primary housing-to-engine mounting bolts to 16-18 ft-lbs (22-24Nm) torque. Tighten rear engine mounting bolts to 35-38 ft-lbs (47-52 Nm) torque.

    I hope that helps.

    DCLARKE

    You might want to double check what I quoted you. The service manual came with my bike, but I am not a mechanic!

    Good luck.
     
    Last edited by a moderator: Jul 28, 2012