1985 wide glide wiring diagram

Discussion in 'Dyna Models' started by funkyskunk, Jul 8, 2010.

  1. funkyskunk

    funkyskunk Member

    10
    0
    0
    I have the Haynes manual for '70-'99 shovelhead and evo big twins but cannot seem to find a wiring diagram to match the 85 glide. I'm gonna try to load a pic of the mess. Any help is appreciated.
     

    Attached Files:

  2. Hoople

    Hoople Account Removed

    7,198
    0
    34
    I will agree. That is a mess. But I have seen worse.

    Welcome to the forum. What kind of problem are you having.

    Your asking for an '85 but your ride is a 2005?
     
  3. glider

    glider Veteran Member

    25,464
    108
    43
    Speak to Steve, I sent him something.:D
     
  4. NEWHD74FAN

    NEWHD74FAN Experienced Member Retired Moderators

    8,177
    98
    15
  5. Chopper

    Chopper Senior Member

    1,635
    48
    18
    Here's the early & late wiring, don't know how they are going to come out, I scan them and if you can't read them just pm me and I'll e-mail them to you, but their 2 mb's each.

    [​IMG]

    [​IMG]
     
  6. funkyskunk

    funkyskunk Member

    10
    0
    0
    Thanks for all the help. Oh and I ride the '05 and work on the '85.
     
  7. Hoople

    Hoople Account Removed

    7,198
    0
    34
    Nice work Chopper. They posted up Great. What type of problem are you having Funky. We will have you going in no time... :s
     
  8. funkyskunk

    funkyskunk Member

    10
    0
    0
    Now Chopper, that's EXACTLY what I'm talking about. That looks much better than what I have to work with. Thanks

    I can't really say the exact problem yet, there are some things that need to be worked out. One of the issues is that I have no signals. When the flasher is installed the lights come on very slow and dim, when i remove the flasher and connect the wires direct there is a bright signal. The flasher is new and I even tried another, so I am lead to believe that it is somewhere in the wires! And I just want to have some reassurance that all the wires are in the right place before I cut em and install new connectors.
     
    Last edited by a moderator: Jul 9, 2010
  9. Hoople

    Hoople Account Removed

    7,198
    0
    34
    Funky,
    I would start by making absolutely sure the correct bulb number is installed in each socket. The bulb load or current draw needs to be correct for the flasher to flash at the correct rate.. While your in there, I would clean the sockets and spray some "Deoxit 5" in each socket.. Deoxit would be great on any quick disconnect cable plugs also.

    At that point see what happens with the flash rate of the turn signals.
     
  10. glider

    glider Veteran Member

    25,464
    108
    43
    Possibly the grounding circuit for the flasher itself is damaged in the wiring or a bad connection. Someplace to start.