I am keen to power my GPS and Ipod through the accessory connection. All appeared straight forward, I bought the origianal HD cigarrete lighter connection with plug for accessory connection, located the connector under the left hand side cover and should have been just about job done.
Problem is that the accessory plug is permanently live and does not change state when I activate / deactivate the accessory rocker switch. I have run a multimeter across the 3 pins in the plug and this confirms my finding, either 12V or 0V, but state is NOT changing with the rocker switch. This bike is BRAND new. Any suggestions?
I am now thinking about hooking up inside the batwing fairing instead of back at the battery, any comments on that?
Problem is that the accessory plug is permanently live and does not change state when I activate / deactivate the accessory rocker switch. I have run a multimeter across the 3 pins in the plug and this confirms my finding, either 12V or 0V, but state is NOT changing with the rocker switch. This bike is BRAND new. Any suggestions?
I am now thinking about hooking up inside the batwing fairing instead of back at the battery, any comments on that?