08 streetglide no ignition power after radio install

Discussion in 'Electrical' started by pmpj172, Jan 8, 2015.

  1. pmpj172

    pmpj172 New Member

    1
    0
    0
    up front thanks for any help you can suggest wracking my brain on this so here it goes.....wifey bought me a radio for my 08 street glide after installing i now have no ignition power to the whole bike turn the switch and nothing there was a blown fuse witch i replaced ,switched all relays around checked all fuses in fuse box,weird part is if i back feed 12v from the radio accessories wire system comes on?bike starts runs normal?is there any other fuses on the bike that aren't in the fuse block i should be looking at
     
  2. dbmg

    dbmg Guest

    If you did not disconnect battery when installing radio you need to check the maxi fuse....
     
  3. Breeze3at

    Breeze3at Well-Known Member

    4,891
    83
    204
    If the '08 is same as '07, t here are more fuses under the Right side cover. It's just in front of the ECM and kind of hidden with wires.
    I think the fuses in there are P&A, fuel pump and ECM.

    Welcome to the forum!