06 primary part#

Discussion in 'Dyna Models' started by maine-e-axe, Mar 26, 2010.

  1. maine-e-axe

    maine-e-axe Junior Member

    732
    28
    1
    Can anyone give me the part# for a 06 SB primary gasket? And has anyone tryed welding the screw's on the rotor inside the primary before they loosen up and rip up the stator, I been thinking about Heli arc the screw's to stop them from backing out? Thank's in advance
     
  2. 60ch

    60ch New Member

    3
    11
    0
    I tig tack welded the rotor screws last year. They were not loose but why take a chance. While you have the primary apart, check the bearing and race on the trans mainshaft through the inner primary. It may need attention. Mine did.
     
  3. maine-e-axe

    maine-e-axe Junior Member

    732
    28
    1
    Thank you 60ch, I'll check the bearing while I'm in there. Can anyone give me the part# for the primary gasket?
     
  4. biscuit

    biscuit Junior Member

    568
    28
    11
    I googled '2006 dyna primary gasket part no'.I came up with an article from "Hot Bike Baggers" that listed the following:

    Primary cover gasket-60539-94b

    Clutch cover gasket-25416-99c

    Inspection cover gasket-60567-90c

    Inspection cover bolts-63859-95b

    Is this what you want-i'm not sure?I'm merely taking a guess based on your choice of repair work and model year.

    Hope this helps.
     
  5. maine-e-axe

    maine-e-axe Junior Member

    732
    28
    1
    Thank you Biscuit, I think that's the one I was looking for, thanx again.