Welcome to the harley davidson forum. Join our discussion today for FREE!
Get your questions answered by harley davidson community gurus and industry experts. Exchange your experience with another members. Access full features forum. Get a members discounts for your harley parts & accessories.
||Thread Tools||Display Modes|
|Nov 24th, 2011, 05:07 PM||#1|
Play The Throttle
Ride: 2000 FLHTC
Join Date: Feb 22nd, 2010
Location: Currently Living In Southern Illinois But Alaska Will Always Be Home
Twist grip sensor 32310-08 wiring key
YELLOW BUNDLE PIN POSITION
Black To Slate (Gray) 1
White To Violet 2
Red To Red 3
Black To Black 4
White To Blue 5
Red To Brown 6
These wires are twenty-two gauge. You can get extention wire from your local Radio Shack.
As near as I can tell, the black and white wires that are heat-shrunk together are something to do with heated grips on Road King models. I cut them off to make pulling the remaining six wires easier.
I recommend that you pull the switch housing wiring through first, then apply a thin coat of dielectric grease to the TGS bundle. Gently pull the bundle through the bars while pushing from the TGS end. When the TGS is about two inches from being seated - quit pulling and push the sensor the rest of the way in. This leaves some slack in the buncle inside the bars.
Good Luck and Safe Riding
|Aug 19th, 2014, 01:27 AM||#2|
Ride: 2010 road king
Join Date: Aug 19th, 2014
Re: Twist grip sensor 32310-08 wiring key
Thanks Chopper Doc, I just started tearing my bike down to install the new twist grip sensor and realized the wires are not the same color code as the factory wires.
You saved me, thanks again.
|Thread||Thread Starter||Forum||Replies||Last Post|
|twist grip sensor||mcbur1||Touring Models||16||May 20th, 2014 01:15 PM|
|rate of twist||gunnut||Gun Locker||10||Mar 4th, 2011 05:14 PM|
|Twist Grip Sensor||tencrore||Touring Models||0||May 26th, 2009 06:19 PM|
|A new twist on bike winterizing||whatyardwork||General Harley Davidson Topic||13||Nov 28th, 2008 08:01 PM|