![]() |
|
|
Hello Guest, Welcome to the HDTalking, registration is completely FREE and takes only a few seconds. By registering you'll gain: Full Posting Privileges, Access to Private Messaging, Optional Email Notification, Upload Photos, Upload Videos, Respond to Polls, Ability to Fully Participate. To register now click here! If you have any problems with the registration process or your account login, please submit ticket to our helpdesk team. |
|
|
Oil Temp GaugeTouring Models |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#11 | |
|
Start The Engine
Ride: 2007FLHTCU
Join Date: Oct 18th, 2009
Posts: 18
My Mood:
![]() |
Re: Oil Temp Gauge
Quote:
Have you ever found a way to make it accurate? |
|
|
|
|
|
|
#12 |
|
Contributor$
Ride: 09 ultra classic
Join Date: Aug 4th, 2008
Location: Southern Ohio
Posts: 701
My Mood:
![]() |
Re: Oil Temp Gauge
I agree with Smitty. It's nice to know when the temp is approaching freezing.
|
|
|
|
|
|
#13 |
|
Moderators
Ride: 2004 Sportster XL1200RS
Join Date: Aug 24th, 2008
Location: Camarillo, CA
Posts: 4,926
My Mood:
![]() |
Re: Oil Temp Gauge
Ttthhhaaatttsss cold enough for me...don't need an outside air temperature guage to tell me when I am shivering or not...
__________________
![]() Please stop by the "Self Help section" for maintenance tips, diagnostic codes and much more. >>Self Help Information and Tips<< |
|
|
|
|
|
#14 | |
|
Warming The Wheels
Ride: 2009 Street Glide
Join Date: Jul 22nd, 2008
Location: Philly
Posts: 114
![]() |
Re: Oil Temp Gauge
Quote:
Auto Meter $47 on ebay, works great and looks cool at night. Forget spending $100+
__________________
Sadist 2009 - Street Glide 2007 - Scion Tc |
|
|
|
|
|
|
#15 |
|
Moderators
Ride: 2004 Sportster XL1200RS
Join Date: Aug 24th, 2008
Location: Camarillo, CA
Posts: 4,926
My Mood:
![]() |
Re: Oil Temp Gauge
Can't really comment about the fit, but the Pro Cycle guages by Auto Meter work and look great. It has neat blue numerals and soft reddish/purple glow that is unique and gets compliments when friends see it at night.
__________________
![]() Please stop by the "Self Help section" for maintenance tips, diagnostic codes and much more. >>Self Help Information and Tips<< Last edited by NEWHD74FAN; Nov 7th, 2009 at 11:07 PM. |
|
|
|
|
|
#16 |
|
Contributor$
Ride: 2007 Ultra Classic
Join Date: Jun 3rd, 2009
Location: Elkridge MD, USA
Posts: 132
My Mood:
![]() |
Re: Oil Temp Gauge
I put in the McEwan a few months ago. FYI and FWIW: I had a defective sending unit. Bad right out of the box. I called and spoke to Mr. McEwan (if I remember, he is out in Arizona.) After I described what I was observing, he sent a replacement to me in the mail, with no questions asked. Really nice service in my opinion.
Mine takes a while to register a reading, all dependent on the air temp. It has been posted before, but any of the readings from the gauge are a single point in the system. The oil temp varies significantly (20 degrees or more) at various locations. The gauge simple gives a reference point to let you know what "normal" is for your bike at a give set of conditions (air temp, speed). If it goes "out of normal" you know you may have an issue and you should pay attention. Also know that the guages lose accuracy significantly at the low end and the high end of the scale. Typically, 25% on each end (high and low range of the gauge) is a SWAG. Another good reason to use a full synthetic motor oil in an air cooled engine! In a moderate rain, 60mph and 48 degrees, my gauge barely broke 170 in 3 hours of riding, as water pulls much more heat away than air. As soon as the rain stopped: 220F. No rain and 50 minutes at 72 mph on cruise control: Air temp 35-50 degrees: 180-210 guage, Air Temp 55-75 degrees: 230-240 guage. Over 80F and it holds at 250-260. (Again 250-260 and all the other readings are me "eyeballing" the gauge.) I got stuck in traffic a few times in the summer: The gauge pegged to what I would assume is 300F. (This was right after I installed the replacement gauge and I was in geek mode and carred an NIST traceable thermocouple in the tour pak, just because I have access to stuff like that and to see what was going on). So I pull over and remove the dip stick and take a reading from the tank: 263F. So, to me the "number" matters but not so much. The change in the number is what is more important. |
|
|
|
|
|
#17 |
|
Community Star
Ride: 2007 Electra Glide Classic
Join Date: Aug 18th, 2009
Location: Warner Robins, GA
Posts: 682
My Mood:
![]() |
Re: Oil Temp Gauge
Peddler / Sadist; Thanks for the info. The Auto Meter is one I was considering. As for the air temp gauge,, when I'm hot I'm hot, when I'm cold, I'm cold. I don't need a gauge to validate what I feel. Especially an inaccurate one!
__________________
I'm catching up on all those naps I didn't take as a child. |
|
|
|
|
|
#18 |
|
Warming The Wheels
Ride: 2009 Street Glide
Join Date: Jul 22nd, 2008
Location: Philly
Posts: 114
![]() |
Re: Oil Temp Gauge
If you have a oil cooler, you might want to consider this, from Jagg:
http://www.setrabusa.com/jagg%20file...structions.pdf Heck you can probably get it at Home Depot. I wish I had installed this, instead of putting the sending unit in the pan. I think this would produce quicker temperature responses and take out the ambient air issues that seem to be caused by air flowing over the huge aluminum pan. Not to mention you can get way more accurate reading on the actual oil temps, instead of the temperature of the oil pan, which is shared with the tranny fuild and right behind the crank. Not to mention you wouldn't have to take the fuel tank off to route the wire. Just a thought.
__________________
Sadist 2009 - Street Glide 2007 - Scion Tc |
|
|
|
|
|
#19 |
|
Account Removed
Ride: 2005 Ultra Classic
Join Date: Oct 17th, 2009
Location: Oakdale, Pa.
Posts: 592
My Mood:
![]() |
Re: Oil Temp Gauge
I agree with kemo, it takes a little while for it to get up there in the temp. range, I have the Harley one in my scooter.
|
|
|
|
|
|
#20 | |
|
Banned
Ride: 09FLHTCU
Join Date: Oct 6th, 2009
Posts: 97
![]() |
Re: Oil Temp Gauge
Quote:
The full-sweep one, with the stepper motor indicator drive seems more likely to follow the sensor more linearly. |
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|