Wont start.....

Discussion in 'Electrical' started by gummybearkiller, Aug 12, 2012.

  1. gummybearkiller

    gummybearkiller New Member

    1
    0
    0
    Hi
    I hope someone can help me out here.
    When i tried to start my bike today it wouldnt turn over at all.
    All lights, turnsignals, horn work properly.
    What didnt work: The powercommander dont light up as it should.
    When hitting the startbutton nothing happens.
    I removed the powercommander and plugged in the stock harness but no difference.
    I checked the killswitch wich works according to my multimeter.
    All fuses are ok and battery is fully charged.
    Yesterday it ran fine and i just turned the ignition off when i came home and today it was kinda dead.
    Would the instruments light up and work if the ecu was broken?
    Could it be the TSM?
    My thought was the tippsensor is in there right?
    Since the powercommander dont get any current when i turn on the ignition but the rest does it feels a bit like a immobilizer kicking in.
    But the TSM aint got no immobilizer huh?
    Damn
    This buggs me out.
    All visible groundings have been checked, so has the battery connections.

    PLEASE HELP ME BEFORE I GO MAD

    Lars
     
  2. bcortani

    bcortani Active Member

    392
    28
    3
    Silly question, is it in gear? My bike wont start at all if it is not in Nuetral...