wireing question.

Discussion in 'Touring Models' started by hatchetman, May 8, 2008.

  1. hatchetman

    hatchetman New Member

    So, today I got the side car off my bagger & tucked all the extra wire away. I confirmed that no wires are touching anything. So my right hand running/turn light does not function. I took the cover off & checked the bulb which is good so I have no power. Is there any junction blocks that I should be aware of or do I start a process of elimination? My ride is an 88 electra glide classic with a 1340. I will get up to speed as soon as I can with this bike but it has been years sinse I wrenched on a Harley. My last one was a 67 shovel so im in the dark!:help
  2. glider

    glider Veteran Member

    There should be some connectors in the harness, check going back into the bike on those wires to see if you have power on them. A service manual would have the wiring diagrams for that bike.
  3. dangerdan

    dangerdan Junior Member

    (EDIT) is "wireing"? Is that German, or something?

    racklefratz, Its not German or something. It is called a tiepo error.

    Oh man, did I just type tiepo wrong ?
    Last edited by a moderator: May 17, 2008